How much does fascia replacement cost?

Typically $350 to $2,200 for most homes, depending on length and material.

What causes fascia rot?

Overflowing gutters, missing drip edge, and roof leaks soak the board. Wood rots when it stays wet.

Should I replace fascia with aluminum or composite?

Both last longer than wood. Cost and appearance decide the choice.

Fascia Board Repair & Replacement Solid Wood for the Hangers

Fascia is the board along the roof edge that the gutter hangs from. Years of overflow soak it, and it rots from the top down. A gutter screwed into soft fascia pulls away no matter how good the gutter is. The repair removes the gutter section, cuts out the bad wood, installs a new board (wood, composite, or aluminum-wrapped), and re-hangs the gutter. Matching paint or a wrap finish makes the repair disappear.

Cost & Scope

Fascia repair typically runs $350 to $2,200 depending on linear feet, board height, and the material. Wood repair runs roughly $6 to $20 per linear foot; composite and aluminum wrap cost more.

If the rot extends into the rafter tails or the roof sheathing, a carpenter or roofer has to handle that part.

Cost Range

$350 – $2,200

Timeframe

1–2 Days

Warranty

2-Year Warranty

Get a Free Fascia Board Repair & Replacement Estimate

Written, in-person, no obligation.

Important Considerations

What shapes the job:

Extent of rot — probe the board along its full length, not just at one soft spot.
Material — wood is cheapest and rots again if water gets to it. Composite and aluminum wrap last longer.
Rafter tails — rot that runs behind the fascia can reach the framing.
Paint — new wood needs primer and paint, or a wrap, to protect it.

Ready to See This Done Right?

Free written estimate, no pressure.

Materials We Use

Materials:

Primed wood, composite, or PVC fascia board

Aluminum fascia wrap

Stainless or coated screws

Exterior primer and paint

Sealant and flashing

Our Process

The usual sequence:

01
Probe & Mark
Fascia probed along its length and bad sections marked.
02
Remove Gutter Section
Gutter taken down where the board is being replaced.
03
Replace the Board
Rotted wood cut out and a new board fastened.
04
Prime & Finish
Primer and paint applied, or the board wrapped.
05
Re-Hang Gutter
Gutter re-hung on hidden hangers and re-pitched.

Get Your Project Scheduled

How to Choose a Provider

What to check:

Rot Extent

Ask how far the installer probed and whether rafter tails were checked.

Material Choice

Ask why they recommend the material they do.

Finish Included

Confirm primer and paint or wrap are in the estimate.

Guarantee & Support

Written Workmanship Warranty

Every project is backed by a workmanship warranty in writing. If a seam leaks or a section pulls away from application error within the term, the installer comes back at no charge.

Licensed & Insured

Every installer in our network carries liability and workers' comp coverage, verified before they're matched with a homeowner. Details are available on request before you book.

Fixed Written Estimate

The number in your estimate is the number you pay, unless you change the scope yourself mid-project.

Daily Site Cleanup

Old gutter sections, cut-offs, and fasteners hauled away before the crew leaves, every day of the project and not just the last one.

Why Choose Gutters Kingdom

Rotted fascia repaired without fixing the overflow that rotted it will rot again. We look at why the water reached the wood before we quote the fix.

Rot probed along the full length
Cause of overflow checked
Primer and finish included

More Fascia, Soffit & Drip Edge

Other Services

Areas We Serve